By grease lubricated bearings, components and accessories for the shelf life of explanation as follows: shelf life depending on the test data and general experience shelf and pre-lubricated bearing or component shelf life as the warp difference grease lubricated bearings or components is expected to use the estimated cumulative period (hereinafter referred to as "life ''), due to the many changes in all aspects of factors, such as lubricant oil yield analysis, lubricants dissipation, operating conditions, installation conditions, temperature, humidity, and deferred storage and so on, it is difficult to predict accurately.
Shelf life of the bearing design performance and shelf life of the main components of the lubricant and the original radial clearance and rotational degrees of freedom to maintain bearing capacity-related components related to the shelf life of the data by the sales representative to obtain, it represents the period prior to use and install .
Based on a broad range of applications, have been carried out for the installation or use of the bearing or component, UK FZ company can not estimate the performance of the grease if compliance with UK FZ recommends using the storage and handling methods, the actual life may reach the shelf life of the period contrary.
UK FZ recommends storage and handling methods used behavior may lead to the shelf life of shortening should really follow the provided specifications to ensure the shelf life of the bearings for any non-warp UK FZ company lubricated bearings or components, UK FZ company does not warranty negative with responsibility.
For UK FZ's finished products (such as bearings, components and accessories, hereinafter referred to as "product ''), we offer the following suggestions store. Without explanation, before use, the product should be kept in its original packaging.
Do not tear up or alter any label or mark on the packaging film version.
When you save the product, should ensure that the packaging is not punctured, crushed or damaged.
After unpacking, the product should be put into use as soon as possible.
After the demolition negated individually packaged in bulk containers from a single product, you should immediately re-seal the container.
According to the method described shelf life, do not use more than the shelf life of the product.
Storage temperature should be between regions should minimize temperature variation between OC (32 degrees Fahrenheit) to 40 C (degrees Fahrenheit).
Relative humidity should be below the storage area should be away from dust, dirt, steam and other harmful air pollutants.
Storage areas should be avoided excessive vibration.
Should avoid any extreme situation.
If the storage conditions for customers do not understand, UK FZ strongly recommends to follow these instructions. As for the specific operating conditions and application requirements, customers should strictly comply with storage requirements.
Prior to shipment, most types of bearings are lubricated by the corrosion of non-homogeneous "type complexing agent for protection. These bearings can be used directly by the lubricant pre-lubricated applications without clearing the corrosion complexing agent. In the pre-lubricated by grease applications, conducting bearings
Before packing, we recommend using the appropriate grease to clear the corrosion complexing agent.
This part of the model selection guide bearings in the packaging before using a common grease lubricated bearings to achieve a normal application. For example, support type and bolt-type roller in the packaging before using temperature grease. Often add bearing grease can be achieved
Optimal performance. Because of the incompatibility of different lubricants careful selection of lubricants.
If the customer before ordering specific request, use the appropriate grease or oil on the pre-lubricated bearings.
Upon receipt of the goods, if the bearing installation is not ready, do not remove the bearing from the package to ensure that it will not be corroded or contaminated. Bearings should be stored in a suitable environment to ensure its still protected prior to maturity.